Product Engineering...Custom Racing Fuel Systems

Regulator Mounting:

Placement and mounting of fuel and/or nitrous regulators is very important for optimum performance. All regulators should be “soft mounted” to isolate them from engine vibration. “Soft mounting” can be accomplished using rubber isolators (PE 4708) or simply suspending the regulator from the fuel lines. In addition regulators should be mounted in front of or near the front of the engine whenever possible. This location will allow the low pressure fuel flow from the regulator to work with the G- forces when the car is launched.

*Part #*	*Description*	*Jobber*
PE 9200	2-Port Fuel Regulator, #10 inlet, #6 outlets	199.00
PE 9200 BR	2-Port Fuel Regulator, *with boost reference port*	215.00
PE 9400	4-Port Fuel Regulator, #10 inlet, #6 outlets	209.00
PE 9400 BR	4-Port Fuel Regulator, with boost reference port	225.00
PE 9700	2-Port Nitrous Fuel Regulator (Specifically for nitrous use)	199.00
PE 9800	4-Port Nitrous Fuel Regulator (Specifically for nitrous use)	209.00

HI-FLO Series Regulator Systems (All Regulator Systems are available in blue/gold, purple/gold, & black/gold. Other color combinations available upon request.)

2-Port Regulator w/Bypass System

PE 9050-2P

Dual 4-Port Regulators w/Bypass System

PE 9150

*Part #*	*Description*	*Jobber*
PE 9000	QuadraJet Regulator with Bypass System *	352.00
PE 9050-2P	2-Port Fuel Regulator with Bypass System *	354.74
PE 9050-4P	4-Port Fuel Regulator with Bypass System *	374.74
PE 9125	1 each 2-port Fuel Regulator and 1 each 4-port Nitrous Regulator with Bypass System*	678.95
PE 9150	Dual 4-Port Regulators with Bypass System *	698.95

*All regulator systems include #10AN inlet fitting

Pro Eliminator System (for applications using (3) separate nitrous systems, and either single or dual carburetors)

*Part #*	*Description*	*Jobber*
PE 9990	Pro Eliminator System (1 - 4-port regulator for carbs, 3 - 4-port nitrous regulators, 1 - quad bypass system, Y-block assembly)	1182.37